The high-reliability lineup of Pilot gas burners.

KGD series

  • 200V
  • 100V
  • LPG
  • 6C
  • 13A
  • Terminal BOX
  • Full auto
  • 比例
  • ON - OFF

The package burners of this line are suited to equipment such as for heat-drying on a production line.
It is possible to direct the flame output direction to either side. Run control includes both proportional control and on/off control. Since its proportional control adapts both to a 4 to 20mA DC electrical signal (PV type), and to 135Ω (PM type), it has the same fine control over combustion volume as the KGM series has through use of its thermal regulator.

KGD

Flame shape

KGD火炎形状写真

Specifications

Model Output Power source Motor Gas piping Flame detector
LPG 13A 6C
KGD-5 46kW 100/200V 0.03kW 10A 15A F/UV
KGD-5PV 46kW 100/200V 0.03kW 10A 15A F/UV
KGD-10 116kW 100/200V 0.25kW 15A 20A 32A F/UV
KGD-10PV 116kW 100/200V 0.25kW 15A 20A 32A F/UV
KGD-10PM 116kW 100/200V 0.25kW 15A 20A 32A F/UV
KGD-20 233kW 100/200V 0.25kW 20A 25A 50A F/UV
KGD-20PV 233kW 100/200V 0.25kW 20A 25A 50A F/UV
KGD-20PM 233kW 100/200V 0.25kW 20A 25A 50A F/UV
KGD-30 349kW 200V 0.4KW 25A 40A 50A F/UV
KGD-30PV 349kW 200V 0.4KW 25A 40A F/UV
KGD-30PM 349kW 200V 0.4KW 25A 40A 50A F/UV
KGD-50PM 581kW 200V 0.75kW 32A 40A 65A UV
KGD-75PM 581kW 200V 1.1kW 40A 50A UV
  • F: Flame rod
    UV: Ultravision
  • The power source for KGD-5 and KGD-5PV is single-phase (1φ ) only.
  • The output for these models meets the listed value only when the supplied gas pressure for LPG is 2.8kPa, the pressure for 13A is 2.0kPa, and the pressure for 6C is 1.0kPa.
  • The heat generation of gas is calculated with HHV (higher heating value)
The letters at the end of the model number reflect the control method:
Control Method
ON-OFF control
Lo-Hi control (damper solenoid)
Lo-Hi control (damper motor)